Difference between revisions of "Stack overflow"
(→Weak Head Normal Form) 
(→Scans) 

(One intermediate revision by the same user not shown)  
Line 107:  Line 107:  
</haskell> 
</haskell> 

−  This attempt to fix the problem doesn't help: 

⚫  People who understand seq and weak head normal form (whnf) can immediately understand what goes wrong here. <hask>(acc+x, len+1)</hask> is already in whnf, so the <hask>seq</hask> (in the definition of <hask>foldl'</hask>), which reduces a value to whnf, does nothing to this. This code will build up thunks just like the original <hask>foldl</hask> example, they'll just be inside a tuple. 

+  
+  For the same reason, this won't help either: 

<haskell> 
<haskell> 

myAverage = uncurry (/) . foldl' (\(acc, len) x > (acc, len) `seq` (acc+x, len+1)) (0,0) 
myAverage = uncurry (/) . foldl' (\(acc, len) x > (acc, len) `seq` (acc+x, len+1)) (0,0) 

</haskell> 
</haskell> 

⚫  People who understand seq and weak head normal form (whnf) can immediately understand what goes wrong here. <hask>(acc+x, len+1)</hask> is already in whnf, so <hask>seq</hask>, which reduces a value to whnf, does nothing to this. This code will build up thunks just like the original <hask>foldl</hask> example, they'll just be inside a tuple. 

+  A deeper `seq` is needed. The solution is to force the components of the tuple, e.g. 

<haskell> 
<haskell> 

myAverage = uncurry (/) . foldl' (\(acc, len) x > acc `seq` len `seq` (acc+x, len+1)) (0,0) 
myAverage = uncurry (/) . foldl' (\(acc, len) x > acc `seq` len `seq` (acc+x, len+1)) (0,0) 

Line 136:  Line 138:  
<haskell> 
<haskell> 

last (scanl (+) 0 [1..5]) > 
last (scanl (+) 0 [1..5]) > 

−  +  ... several steps ... > 

((((0+1)+2)+3)+4)+5 
((((0+1)+2)+3)+4)+5 

</haskell> 
</haskell> 
Latest revision as of 20:41, 16 January 2012
There is no call stack in Haskell. Instead we find a pattern matching stack whose entries are essentially case expressions waiting for their scrutinee to be evaluated enough that they can match a constructor (WHNF).
When GHC is evaluating a thunked expression it uses an internal stack. This inner stack for thunk evaluation is the one that can overflow in practice.
Folds
First, read Performance/Accumulating parameter. If you are not writing your code tailrecursively, then that is why you are getting stack overflows. However, making code tailrecursive in a lazy language is not quite the same as in a eager language. This page is more geared to the latter case using foldr/l as the prime culprit/example. As such Fold may be helpful, but isn't too critical. Also knowing what seq
and ($!)
do, as covered in Making Haskell programs faster and smaller and in the Haskell Report is necessary.
The definitions of the three folds we'll be looking at are as follows:
foldr f z [] = z
foldr f z (x:xs) = f x (foldr f z xs)
foldl f z [] = z
foldl f z (x:xs) = foldl f (f z x) xs
foldl' f z [] = z
foldl' f z (x:xs) = (foldl' f $! f z x) xs
foldl' (found in e.g. Data.List) is just a stricter version of foldl.
The oneline summary for folds: if the binary operation is strict use foldl', otherwise use foldr.
Common newbie stack overflowing code:
mysum :: [Integer] > Integer
mysum = foldr (+) 0
main = print (mysum [1..1000000])
If you've read Performance/Accumulating parameter, you should immediately see the problem from the definition of foldr above. Quite simply, foldr isn't tailrecursive! But,
concat xss = foldr (++) [] xss
This is from the Haskell Report. Surely they know what they are doing! And sure enough,
main = print (length (concat [[x]  x < [1..1000000]]))
works fine.
Less common newbie stack overflowing code:
mysum :: [Integer] > Integer
mysum = foldl (+) 0  foldl instead of foldr this time
main = print (mysum [1..1000000])
So what's going on here? Looking at the code for foldl, it looks tailrecursive. Well, much like you can see the problem with a nontailrecursive factorial by unfolding a few iterations, let's do the same for our foldl definition of sum, but making sure to use a callbyname/need evaluation order. Here is the unfolding,
mysum [1..10] >
foldl (+) 0 (1:[2..10]) >
foldl (+) (0+1) (2:[3..10]) >
foldl (+) (0+1+2) (3:[4..10]) >
foldl (+) (0+1+2+3) (4:[5..10]) > ...
I think you get the idea. The problem is that we are building up a chain of thunks that will evaluate the sum instead of just maintaining a running sum. What we need to do is to force the addition before recursing. This is exactly what foldl' does.
Just to check,
mysum :: [Integer] > Integer
mysum = foldl' (+) 0
main = print (mysum [1..1000000])
works fine.
Now let's go back to the foldr sum and concat. What's the difference between sum and concat that makes the sum definition wrong, but the concat definition right. Again, let's evaluate each by hand.
mysum (+) 0 [1..10] >
foldr (+) 0 (1:[2..10]) >
1+foldr (+) 0 (2:[3..10]) >
1+(2+foldr (+) 0 (3:[4..10])) > ...
Okay, no surprise there.
concat [[1],[2],[3],...] >
foldr (++) [] ([1]:[[2],[3],...]) >
(1:[])++foldr (++) [] [[2],[3],...] >
1:([]++foldr (++) [] [[2],[3],...])
Notice that there is no '> ...' at the end. That was the complete evaluation. There is no reason to do anything more, unless we look at the result. We may well GC the 1 before we look at the tail, and GC the first cons cell before we look at the second. So, concat runs in a constant amount of stack and further can handle infinite lists (as a note, it's immediately obvious foldl(') can never work on infinite lists because we'll always be in the (:) case and that always immediately recurses). The differentiator between mysum and concat is that (++) is not strict* in its second argument; we don't have to evaluate the rest of the foldr to know the beginning of concat. In mysum, since (+) is strict in its second argument, we need the results of the whole foldr before we can compute the final result.
So, we arrive at the oneline summary: A function strict* in its second argument will always require linear stack space with foldr, so foldl' should be used instead in that case. If the function is lazy/nonstrict in its second argument we should use foldr to 1) support infinite lists and 2) to allow a streaming use of the input list where only part of it needs to be in memory at a time.
Okay, both here and in the oneline summary, there is no mention of foldl. When should foldl be used? The pragmatic answer is: by and far, it shouldn't be used. A case where it makes a difference is if the function is conditionally strict in its first argument depending on its second, where I use conditionally strict to mean a function that is strict or not in one argument depending on another argument(s). For an example, consider a definition of (*)
that builds up ASTs of arithmetic expressions and incorporates a simplification (a*0 = 0
and then 0*a = 0
); then if product
is defined by foldl (*) 1
, product [
⊥,0]
will terminate with 0 while a definition in terms of foldl'
wouldn't. However, I can't think of a really convincing example. In most cases, foldl' is what you want.
* A strict function is a function f
, such that f
⊥=
⊥. Typically, we think of a function "being strict" in an argument as a function that "forces" its argument, but the above definition of strict should immediately suggest another function that is strict and doesn't "force" it's argument in the intuitive sense, namely id. ([]++) = id
and therefore is a strict function. Sure enough, if you were to evaluate (concat (repeat []))
it would not terminate. As such, (++)
is a conditionally strict function. This also makes the "always" slightly imprecise, a function that is strict because it just returns it's argument, will not use up stack space (but is, as mentioned, still an issue for infinitely long lists).
Weak Head Normal Form
Common newbie stack overflowing code:
myAverage = uncurry (/) . foldl' (\(acc, len) x > (acc+x, len+1)) (0,0)
People who understand seq and weak head normal form (whnf) can immediately understand what goes wrong here. (acc+x, len+1)
is already in whnf, so the seq
(in the definition of foldl'
), which reduces a value to whnf, does nothing to this. This code will build up thunks just like the original foldl
example, they'll just be inside a tuple.
For the same reason, this won't help either:
myAverage = uncurry (/) . foldl' (\(acc, len) x > (acc, len) `seq` (acc+x, len+1)) (0,0)
A deeper `seq` is needed. The solution is to force the components of the tuple, e.g.
myAverage = uncurry (/) . foldl' (\(acc, len) x > acc `seq` len `seq` (acc+x, len+1)) (0,0)
or more clearly and concisely using a recent GHC extension
myAverage = uncurry (/) . foldl' (\(!acc, !len) x > (acc+x, len+1)) (0,0)
Scans
A subtle stackoverflow surprise comes when
print (scanl (+) 0 [1..1000000])
completes successfully but
print (last (scanl (+) 0 [1..1000000]))
causes a stack overflow.
The latter stack overflow is explained exactly as before, namely,
last (scanl (+) 0 [1..5]) >
... several steps ... >
((((0+1)+2)+3)+4)+5
This is exactly like foldl
, building a deep thunk, then evaluating, needing much stack.
Most puzzling is why the former succeeds without a stack overflow. This is caused by a combination of two factors:
 thunks in the list produced by
scanl
enjoy sharing: late thunks build upon early thunks  printing a list of numbers evaluates early thunks and then late thunks
To exemplify, here is an abridged progression. I use this pseudo format to depict sharing of thunks
expr where var=expr, var=expr
although in reality it is more like a pointer graph.
print (scanl (+) 0 [1..1000000]) >
print (a : case [1..1000000] of <nowiki>...</nowiki> x:xs > scanl (+) (a+x) xs) where a=0 >
<nowiki>... evaluate a to 0 for printing, I/O, some more steps ...</nowiki> >
print (scanl (+) (a+1) [2..1000000]) where a=0 >
print (b : case [2..1000000] of <nowiki>...</nowiki> x:xs > scanl (+) (b+x) xs) where a=0, b=a+1 >
<nowiki>... evaluate b to 1 for printing, I/O, some more steps ...</nowiki> >
print (scanl (+) (b+2) [3..1000000]) where b=1 >
print (c : case [3..1000000] of <nowiki>...</nowiki> x:xs > scanl (+) (c+x) xs) where b=1, c=b+2 >
<nowiki>... evaluate c to 3 for printing, I/O, some more steps ...</nowiki> >
print (scanl (+) (c+3) [4..1000000]) where c=3 >
print (d : case [4..1000000] of <nowiki>...</nowiki> x:xs > scanl (+) (d+x) xs) where c=3, d=c+3 >
<nowiki>... evaluate d to 6 for printing, I/O, some more steps ...</nowiki> >
print (scanl (+) (d+4) [5..1000000]) where d=6 > etc.
The important thing to watch is the life cycle of intermediate thunks, e.g., c
is created at some point as a 1level deep addition, then almost immediately reduced to a number out of necessity, before a later thunk d
builds upon it. Therefore there is no growth and no stack overflow.
In contrast, again, last (scanl (+) 0 [1..1000000])
skips over to the last thunk right away. Since early items are not reduced yet, the last item remains a huge chain and causes overflow.
As an addendum, there are three ways of handling this problem and similar ones:
 You can have your traversal functions (in this case, last) force the list as it goes along.
 You can use (perhaps custom) versions of the list (or data structure, in general) producing functions (in this case, scanl) that force the elements as it builds the data structure.
 You can use a data structure that's strict in its elements, in this case it would be a head strict list.